Installing in your car

Use the supplied mount to install your TomTom GO ESSENTIAL in your vehicle. Read the instructions about positioning your device before you install your TomTom GO ESSENTIAL.

To install your TomTom GO ESSENTIAL, do the following:

1. Connect the supplied USB cable to the mount. If the mount is integrated into your TomTom GO ESSENTIAL, connect the USB cable to the device.

   Note: Use ONLY the USB cable supplied with your TomTom GO ESSENTIAL. Other USB cables may not work.

2. Connect the USB cable to the USB car charger and plug this into the power supply on your dashboard.
3. Choose the best smooth location, on your windshield or side window, to mount your TomTom GO ESSENTIAL.

   Tip: If the mount is integrated into your TomTom GO ESSENTIAL, you can easily change the rotation of your device. Push the button on the back of the device to release the mount, then slide the mount out. Insert it back into the other side of the device.

4. Make sure that both the suction cup on the mount and your windshield are clean and dry.
5. Press the suction cup of the mount firmly against your windshield.
6. Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
7. If your mount is not integrated into your TomTom GO ESSENTIAL, place your TomTom GO ESSENTIAL in the mount, making sure that it clicks into place.

Dashboard adhesive disks are available as part of a range of accessories for your TomTom GO ESSENTIAL. For more information, go to tomtom.com/accessories.