Using the anti-theft solution

If your box includes an anti-theft solution, it is supplied in two parts:

• A RAM lock for the mount.

  This lock prevents the unscrewing of the RAM arm from the motorcycle.

• A RAM Pin-Lock™ for the TomTom Rider itself.

  This lock prevents the disconnection of the TomTom Rider from the dock.

Important: Both locks have keys so you need to make sure that you keep these two extra keys with you at all times!

To use the anti-theft solution, do the following:

1. Lock the RAM mount to your motorcycle as shown below.

   Note: Make sure you use the longer screws provided with your TomTom Rider lock.

   

2. Unscrew the wingnut from the RAM arm.

   

3. Attach the RAM Pin-Lock.

   

4. Attach the RAM arm to the RAM mount and the active dock.

   

5. Attach the RAM Pin-Lock cap on to the RAM Pin-Lock.

   

6. Tighten the RAM Pin-Lock as shown.

   

7. Remove the RAM Pin-Lock cap.

   

8. Lock your TomTom Rider with the key to prevent removal from the mount