Navigating using a track

You can import tracks on to your TomTom GO using MyDrive. To navigate using an imported track, do the following:

1. In the Main Menu, select My Routes.
2. Select a track from your list.

   The track route is shown on the map view.

   

3. Select the track, then select the pop-up menu.

   

4. Select Drive to Starting Point.

   The starting point of the track is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically.

   Note: You see two different colours on the map for your route and track. You see one colour for the route from your current location to the starting point, and another second colour for the track.

   Tip: There are two other ways to navigate using a saved route:

   Select the starting point of the route. When the pop-up menu opens, select Drive to Starting Point.

   Alternatively, select Drive to Starting Point or Ride to Route in the Current Track menu.

   If you select Drive, instead of Drive to Starting Point, your device calculates a route from your current position to the nearest point of the track. Use this option if you are close to the track and want to continue or start at the nearest point.