Planning a route using a mapcode

QUICK SEARCH ONLY

Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving.

To plan a route using a mapcode, do the following:

1. Select the Main Menu button to open the Main Menu.

   

2. Select Search.

   

   The search screen opens with the keyboard showing.

3. Type in your mapcode. You can enter any of these mapcode types:
   • International, for example, WH6SL.TR10.
   • Country-specific, for example, GBR 8MH.51.
   • Alternative country-specific, for example, GBR 28.Y6VH or GBR LDGZ.VXR.

   Tip: All the mapcodes in this example are for the same location - Edinburgh Castle in the UK. See About mapcodes for information on how to get a mapcode for a location. 

4. When the full map code has been entered, the location is shown in the Addresses column.

   Towns and roads are shown on the left, POIs are shown on the right.

   Tip: To see more results, hide the keyboard or scroll down the results list.

   Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button:

   

5. Select a suggestion for your destination.
6. To plan a route to this destination, select Drive/Ride depending on which device you are using.

   A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.

   Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination.

   Tip: You can add a stop to a route that you have already planned.

   Tip: You can save a route using My Routes.