Use the supplied mount to install your TomTom TRUCKER in your vehicle. Read the instructions about positioning your device before you install your TRUCKER.
To install your TRUCKER, do the following:
Connect the supplied USB cable to the mount. If the mount is integrated into your TRUCKER, connect the USB cable to the device.
Note: Use ONLY the USB cable supplied with your TRUCKER. Other USB cables may not work.
Connect the USB cable to the USB car charger and plug this into the power supply on your dashboard.
Choose the best smooth location, on your windshield or side window, to mount your TomTom TRUCKER.
Tip: If the mount is integrated into your TRUCKER, you can easily change the rotation of your device. Push the button on the back of the device to release the mount, then slide the mount out. Insert it back into the other side of the device.
Make sure that both the suction cup on the mount and your windshield are clean and dry.
Press the suction cup of the mount firmly against your windshield.
Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
If your mount is not integrated into your TRUCKER, place your TRUCKER in the mount, making sure that it clicks into place.
Dashboard adhesive disks are available as part of a range of accessories for your TRUCKER. For more information, go to tomtom.com/accessories.